8800GTX Vmod

Last edited by V2-V3 on Mon May 21, 2007 8:42 pm; edited 1 time in total

While load testing DarthBevis's Vapo on a QX6700 I thought it would be an excellent time to benchmark both my 8800's to give DB an idea of how his system would perform.
As usual my Overclocking got the best of me and 600MHz/2000MHz on an 8800GTX SLI was just not enough! Being I only had stock cooling for the cards, the only way i could push them any higher was to Vmod the core and RAM.
So a trip to Radio shack was planned. To our non surprise they had everything we needed "Out of Stock" so we asked when our desired components would be restocked. We were told that they are the last store in 300 miles to stock absurd components like "Trimmers" and "PCB" and they would be dropping that product line.... I presume to make room for more pink cell phone covers Sad

so we had to make do with a hand full of 1K Micro Pots and a few 100K Pots
they didn't even have a conductive pen!

I knew this would be fun! After searching around my house i was able to track down some much need 24Guage solid core wire and a few small Bread boards.

At least something went right Smile

GPU Vmod 2- 1k Micro Potentiometers (very fine tuning)
DDR Vmod 1- 100K Micro Potentiometer
1 Bread board
3ft 24 gauge solid core wire.
1- Molex connector for easy measuring points.

Full article with mod details here:http://www.teamnexgen.org/foru.....l#post1629

Enough of my ranting here are some pictures:

_________________
Team NexGen

Support by: Danger Den, ASUS, ThermalTake Thank You!

Here is a easy way to help cool the card (worked really good in CrossFlo)

it eliminates a LOT of the back pressure and reduces heat escaping through the 5 slots in the side of the card

if water cooling is out of your budget that is by far the best option i have seen Smile

its a shame that the EVGA 8800GTX has such a low flow fan Razz

_________________
Team NexGen

Support by: Danger Den, ASUS, ThermalTake Thank You!

I made it out of a scrap of alum. The newest CrossFlo has a bit of the h20...But on the Red one it lowered the temps between 5-8C

(lol you guys are WAY braver than me to solder a 8800 card) Its gonna be fun to see what you bring to PDX10.

damn you are pretty bawlsy, i wouldnt even think about modding an 8800, sounds awesome thought im glad it worked out, good job.

Well what are the results?

kuyaglen wrote:

Well what are the results?

Yeah, whats it able to push now with the volt mod, 700/2200? ish?

_________________
A Distorted Reality Is Now A Necessity To Be Free

3dmark 05: 26K
3dMark 06 19K
Aquamark 3D: 190K

Test Rig:
VapoChill LS Modded by Team NexGen
QX6700ES 1.58Vcore @ 4000MHz
EVGA 680I Rev D0 A1
EVGA 8800GTX SLI 600MHz/1000MHz
2GB Corsair 6400C4 800MHz
Koolance 1200W Liquid Cooled PSU
80GB WD 8MB Cache

Im still waiting to bench on overclocked SLI but here is what i got with the single card.

EVGA 8800GTX NexGen Vmod:
700MHZ GPU, 2250MHz DDR on stock cooling 1.5VGPU,2.05VDDR

Stock Voltage 1.3V GPU and 1.9V DDR

Single card configuration 23K 3DM05

_________________
Team NexGen

Support by: Danger Den, ASUS, ThermalTake Thank You!

What settings do you play your games at?

V2-V3 wrote:

3dmark 05: 26K
3dMark 06 19K
Aquamark 3D: 190K

Test Rig:
VapoChill LS Modded by Team NexGen
QX6700ES 1.58Vcore @ 4000MHz
EVGA 680I Rev D0 A1
EVGA 8800GTX SLI 600MHz/1000MHz
2GB Corsair 6400C4 800MHz
Koolance 1200W Liquid Cooled PSU
80GB WD 8MB Cache

Im still waiting to bench on overclocked SLI but here is what i got with the single card.

EVGA 8800GTX NexGen Vmod:
700MHZ GPU, 2250MHz DDR on stock cooling 1.5VGPU,2.05VDDR

Stock Voltage 1.3V GPU and 1.9V DDR

Single card configuration 23K 3DM05

when did they say they will get you the new evap head? that think looks pimp and will be nice in the enclosure, i wonder if the clocks will be better with it

V2-V3 wrote:

3dmark 05: 26K
3dMark 06 19K
Aquamark 3D: 190K

Thats cool and all but how bout some actual game #'s @ least @ 1920x1200?

2048X1536 on a 21" CRT baby!

_________________
Team NexGen

Support by: Danger Den, ASUS, ThermalTake Thank You!