AT-AT walker case mod

Last edited by Baeowolf on Tue Jan 24, 2012 11:52 am; edited 2 times in total

Uploaded with ImageShack.us

the package arrives!

Uploaded with ImageShack.us

Heres my new MOD

Uploaded with ImageShack.us

another view

Uploaded with ImageShack.us

From the rear

Uploaded with ImageShack.us

pulling legs off LOL

Uploaded with ImageShack.us

this deck has to go

Uploaded with ImageShack.us

A lot of screws to get this apart... fairly straight forward wiring

Uploaded with ImageShack.us

thinking where to go next

Uploaded with ImageShack.us

won this at GNWLAN 6 for helping tear down Smile

not sure if im going with this or a M-itx 1155 board

Uploaded with ImageShack.us

Boards just slightly to big... i hear a dremel in the future

Uploaded with ImageShack.us

or possibly upside down...

Uploaded with ImageShack.us

or vertical against one side...

Uploaded with ImageShack.us

its a start

will post as i go

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Dude I wanna ride that thing when you're done!!

_________________
Good Karma good - Bad Karma bad

BOBDBONE wrote:

Dude I wanna ride that thing when you're done!!

i know right

this is the 2010 rerelease its like 4 inches taller then the original

dimensions are 24" tall 28" long 12"wide

its huge

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

I picked one up about a year back...just a bit tight for my full-sized card and water cooling.

Good luck squeezing everything in!

_________________
Custom Field Case Mod
Gigabyte H67N-USB3 2500K on DD (22C idle) 480GTX on DD (37C idle)
2X140mm radiators -- DDC pump
Logitech g700 mouse, Zboard Merc, and Psyko 5.1 headphones
iZ3D 22" Display
Attendee @ 3-18 inclusive, + 18.5 and 19 to come

May make 2 mods side by side if i cant get what i want into the walker

Uploaded with ImageShack.us

just a quick pic of what im also thinking of doing.

its amazing how the shape of the Cosmos case resembles the body

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Uploaded with ImageShack.us

The top is off and the center deck is removed

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Uploaded with ImageShack.us

Now to get to figuring out how to fit it inside

Uploaded with ImageShack.us

I think this is how it shall fit best

Uploaded with ImageShack.us

Uploaded with ImageShack.us

rough idea of how it will look

Uploaded with ImageShack.us

PSU from the drop down door in the rear

sorry its taken me so long to post updates.

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Will be using the PSU out of a thermaltake Element Q LAN case.. Maybe also the mobo mounting plate as well

Got the idea to use this case from Leatherfaces RC mod

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

i know right, and just a little fyi that power supply will run a 500 watt 560ti just fine I had to buy molex splitters for mine but runs and powers just fine, ssd powers up and all. pretty tough little 220 i must say

_________________
The Mod Scientist. Mad Science Casemods http://www.wix.com/spopajr/leatherface-casemods

leatherface wrote:

i know right, and just a little fyi that power supply will run a 500 watt 560ti just fine I had to buy molex splitters for mine but runs and powers just fine, ssd powers up and all. pretty tough little 220 i must say

Wow.. I wasn't even gonna bother with a real video card because I figured you prob switched out the psu to run everything. I was thinking about switching that bored I have for a zotac that could run my 2600k proc. what board did you use again?

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

zotac h67-ITX Wifi MB, Zotac 560ti, patriot ssd , and 8 gigs of patriot G2 ram all on the 220 watt and a couple of led's, at first people said no it wont work and blah , blah, but then I said what the hell lets try it, not a single crash or issue and my son played bf3 and lol on it for a few days before shipping it off.

_________________
The Mod Scientist. Mad Science Casemods http://www.wix.com/spopajr/leatherface-casemods

Awesome.. I think I may go your route then.. I had setup the components in the TT case to make sure all the components worked and installed windows and SWTOR on it but this board was def designed to be a htpc.. Don't get me wrong it's a nice setup.. Just the wrong application for this mod.

Thanks for the input leatherface.. I may pick your brain from time to time if I come up against issues if you don't mind?

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Uploaded with ImageShack.us

Got the rest of the build items yesterday

going with the Sapphire board

Thermaltake PSU and components from the Element Q case

MSI 6670 Graphics card

Corsair Force 3 SSD

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Uploaded with ImageShack.us

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Lookin good! Can't wait to see that beast at the LAN!

_________________
DangerDen Q20
i7-3820
Intel DX79TO
16gb Kingston HyperX 1600mhz
eVGA GTX680 2gb
Intel 520 series 120gb Boot | 5x Intel 160gb Gen 2 Raid 0

Jeff did have this planned out - I remember a few conversations about it. Glad a PDXLANer ran with it!

Hope you are willing to have it at our next OMSI event!

_________________
Blah Blah Blah

DarthBeavis wrote:

Jeff did have this planned out - I remember a few conversations about it. Glad a PDXLANer ran with it!

Hope you are willing to have it at our next OMSI event!

Didn't realize someone else was going to do it.. Doh!!

Yes I would honored to have it at our next OMSI event. Thx

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Will try and post some more updates tomorrow.

Been cutting,sawing and dremeling all day... Seems like for all the time today I should be farther lol

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

This is going to be cool to see when finished!

_________________
PDXLAN: 16.5, 17, 18, 18.5, 19, 20, 20.5, 21, 22
VectorLAN: 1.0, 2.0
GeForce Lan 6
My Technology News Wesbite - http://www.techpron.com
[NRP] Group - http://www.nerdragepros.com
Friends me on Steam - http://steamcommunity.com/id/g3d
BF3 - Uber_Tiny

Uploaded with ImageShack.us

this is the case thats giving up its inner parts to the walker.. love this case but somethings have to be sacrificed for the greater good lol

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza