Rosewill Mod by Bobdbone + [TB]Rod

Thats right folks I have shots of BOBDBONE in action!

The Una-modder

This is Bob laying down the Epoxy based primer coat.

Here he is polishing the side panels!

_________________
Rod
http://www.RodRosenberg.com

This is a shot of the PSU after sleaving 52 wires! the added bulk was a nightmare to work with and we ended up dropping the fan out of the PSU and to the bottom of the case.

wire management in progress

This mobo is a beast the feature list is huge! I also found out from Jacob at EVGA that its one of three currently in the US!

_________________
Rod
http://www.RodRosenberg.com

Nice work guys!

Just a question... Why didn't you go with a full modular power supply to make sleeving easier?

_________________
2600K@5.0 GHZ, 16GB Crucial Smart Tracer, Asus Z68 Pro MB , 2 Kingston HyperX 120GB SSD's in Raid 0, Asus Xonar Essence STX Sound Card , 2 MSI 7970 Lightnings @ 1100/1500, Silverstone 1000W PSU ,Koolance waterblocks, HW Labs Rads. One of a kind Orange Danger Den Monsoon Bay res. Moutain Mods Pinnacle 24.

I am the self proclaimed king of Eyefinity at PDXLAN. Cover of CPU mag Oct 2011

Since this build was for Newegg/Rosewill we had to use a one of the top end Rosewilll power supplies and they don't do fully modular Sad

_________________
Rod
http://www.RodRosenberg.com

rodrosenberg wrote:

Since this build was for Newegg/Rosewill we had to use a one of the top end Rosewilll power supplies and they don't do fully modular Sad

Good reason. If a PITA....

_________________
Meddle not in the affairs of Dragons, for thou art crunchy and taste delicious with SALSA-Q. But then, doesn't everything????
PDXLAN 14, 14.5, 15, 16, 16.5, 17, 18, 18.5, 19, 20, VectorLAN, 20.5, 21 (no VectorLAN II, no 22 damn it!)
GNW LAN 6, 7, 8, 9, SSL, Lanapalooza 2012, (Lanapalooza 2013)
Geektopia 2012
Let there be LAN 4

rodrosenberg wrote:

Since this build was for Newegg/Rosewill we had to use a one of the top end Rosewilll power supplies and they don't do fully modular Sad

Ic ... Its what you had to work with...

_________________
2600K@5.0 GHZ, 16GB Crucial Smart Tracer, Asus Z68 Pro MB , 2 Kingston HyperX 120GB SSD's in Raid 0, Asus Xonar Essence STX Sound Card , 2 MSI 7970 Lightnings @ 1100/1500, Silverstone 1000W PSU ,Koolance waterblocks, HW Labs Rads. One of a kind Orange Danger Den Monsoon Bay res. Moutain Mods Pinnacle 24.

I am the self proclaimed king of Eyefinity at PDXLAN. Cover of CPU mag Oct 2011

Amazing work guys!!!

_________________
PDXLAN 11,16,16.5,17,18,18.5,19 soon 20 and a little later 20.5(November)
SSL, GeForce LAN 6, GNWLAN 6, GNWLAN7,Lanapalooza

Thx guys.

We were able to give input but were limited on what we could do since all the parts came from them. And we had a very short window to get this all accomplished. It was what you would call a speed mod I guess. Razz

_________________
Good Karma good - Bad Karma bad

Some press from PAX East

http://www.pureoverclock.com/story6084.html

http://www.legitreviews.com/news/12792/

_________________
Rod
http://www.RodRosenberg.com

So you guys get to keep the hardware thats in the case as payment, right? Wink

_________________
Bods-Mods.com - Modding the world, one case at a time.

I really like the shots of Bob in action and getting to see how he sets up his work area/tools used.

@Boddaker I wish we will be getting some hardware but not that setup Sad

@Jaden Bob is the coolest and is a really good teacher so ask away if you want to know more about his magic!

_________________
Rod
http://www.RodRosenberg.com

WOOT! Worlds first.....

^_^

_________________
=- autobotguy -=
"Common sense flew out the window when political correctness stepped in"

http://www.youtube.com/watch?v.....AAAAAAAACA

3 minutes in

_________________
Danger Den Lan Tower 450, GIGABYTE GA-Z77N, Intel i3 2100, 8gb Corsair Vengeance, Crucial M4 60GB, Western Digital 1tb Black, ZOTAC GTX 560ti, Silverstone 450W SFX.

Very nice build guys.

_________________
Desktop:Intel i7-3770K, 16GB G.Skill @ 1600, Intel 240GB SSD - 3TB total HDD, ATI RADEON 5870, ANTEC 300
18, 18.5, 20